Adc and 3 Doubler Manual de usuario descargar pdf (Pagina 22)

Generic Information LTPH-UM-1234-01

16 April 30, 2003 HDU-409 Lists 1, 2, and 3

ALTERNATIVE DOUBLER ENCLOSURE

APACITIES

Reduce the doubler capacity by one for every two doublers that do not have

an empty slot between them. If the application allows seven doublers, but two

are directly adjacent to each other, then the total capacity must be reduced to

six.

Standard T1 or LD1 repeaters can be installed in the same enclosure with

doubler units. If this method is used, the maximum number of doublers that

can occupy the same case with the standard repeaters must be reduced by one

for every four T1 or LD1 repeaters (or fractions thereof) installed.

Rule one on page 11, in the section titled, “Doubler Enclosure

Capacities with Full Solar Load” on page 9, does not apply if

the adjacent slot is occupied by a T1 or LD1 repeater;

however, slots adjacent to doublers should be left vacant if

possible.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 43 44

Sin comentarios

Adc and 3 Doubler Manual de usuario Pagina 22