Adc Campus-REX RS Interface Card Manual de usuario descargar pdf (Pagina 83)

Configuring with an ASCII Terminal

Campus-REX RS Interface Card User Manual 5-7

The following SNMP parameters must be set to manage the Campus-REX

over an SNMP network:

• SNMP Read Only Comm String provides the authentication string used

for SNMP read-only operations

• SNMP Read Write Comm String provides the authentication string used

for SNMP read-write operations

You can also set the Campus-REX to perform authentication error trap

generation. To enable this feature, do the following:

• Set the Authentication Trap Status to Enabled or Disabled.

• Enter the IP Address for the first Trap Receiver.

• Enter a comm string for the first Trap Receiver.

• Enter the IP Address for the second Trap Receiver.

• Enter a comm string for the second Trap Receiver.

To configure the SNMP parameters:

1 From the Main Menu, type then press . The Data Port Settings

menu displays.

2 ENTER

Dec 9, 1999 ADC DSL SYSTEMS INC., CAMPUS RS, Version x.xx 13:16:44

Local Unit ID: Campus-REX Unit #34 Local I/F: REX

Remote Unit ID: Campus-REX Unit #12 Remote I/F: REX

Circuit ID: Network Extension Circuit 5001

DATA PORT SETTINGS

MAC ADDRESS: 00:20:A7:21:2F:6B

10 BASE-T STATUS: Up

1) BRIDGE/ROUTER CONFIGURATION

2) SNMP CONFIGURATION

3) WRITE NVRAM

4) RESET INTERFACE CARD

WARNING: NVRAM must be written and interface card reset for any

configuration changes to take effect.

(R)eturn

ENTER CHOICE>

CAD1069i5.book Page 7 Thursday, May 30, 2002 7:32 AM

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 147 148

Sin comentarios

Adc Campus-REX RS Interface Card Manual de usuario Pagina 83