Adc CRA-C Manual de usuario Pagina 20

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 86
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 19
Install the Megabit Modem CRA-C
12 Megabit Modem CRA-C User Manual
Install the Megabit Modem CRA-C
Complete the steps in the order listed to install the Megabit Modem CRA-C:
connect to the ADSL line
connect to the data network
Connect to the ADSL Line
The Megabit Modem CRA-C requires a single pair of telephone wires to
connect the subscriber to the service provider. One wire is the Tip
and the other is the Ring. See Table 4 for pinouts. Connect the Tip and Ring
wires to your Megabit Modem CRA-C:
1 Plug the RJ-45 connector of the ADSL cable (gray) into the
ADSL port on the Megabit Modem CRA-C rear panel (Figure 4).
2 Connect the RJ-11 connector to the ADSL line.
Figure 4.
Connecting to the ADSL Line
Vista de pagina 19
1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 85 86

Comentarios a estos manuales

Sin comentarios