ADC CUDA 3 Manual de usuario descargar pdf (Pagina 4)

Trigger

The ADC 6000 features a digital processing trigger. This feature makes use of the real-

time hardware waveform processing capability and allows you to define trigger parameters

based on the actual waveform data. Trigger on any input channel or one of two external

trigger source inputs is provided. Trigger conditions are set using the ADC 6000 Signal

Display software tool or from your application.

External Clock and I/O

The ADC 6000 features a 1 GHz external reference clock input, which can be used in

place of the internal ADC clock.

Several test outputs are available for custom application support and system integration.

ADC 6000 provides a programmable calibrator output with a variety of test signals. You

can connect this calibrator to any input channel and run an automatic calibration routine to

ensure accurate operation of the instrument.

PCI Express Host Computer Interface

The ADC 6000 provides PCI Express Gen 2 x4 interface to the AXIe backplane. The PCI

Express bridge card installs in the host computer, and a standard PCI Express x8 cable

connects the AXIe chassis to the host computer. High speed waveform transfer with

sustained data rates up to 1.6 GByte/sec is possible from this port back to the host

computer.

With the upcoming AXIe-based Digital Processor DP 6000 Module,

which provides four x8 PCIe Gen 2 interfaces to the host PC, the

combined sustained data rate for data transfer from the ADC 6000

Module can be increased. This feature ensures that the standard x4

PCIe Gen 2 communication interface from the standard AXIe

chassis to the computer will not become a bottleneck for your application.

Please refer to “AXIe ADC and DP configurations” document P/N 02-107561 for more

details

1 2 3 4 5 6 7 8 9 ... 20 21

Sin comentarios

ADC CUDA 3 Manual de usuario Pagina 4