ADC Cuda 12000 Información técnica Pagina 471

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 652
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 470
Cuda 12000 IP Access Switch CLI Reference Guide
show modem <mac-address> 467
show modem <mac-address>
Queries a specified cable modem directly to retrieve and display its current MIB values, which are
described in MIB II, RFC2669, RFC2670, the Baseline Privacy Interface (BPI) and BPI Plus
specifications, and other cable modem networking standards documents and MIBs. If you do not
specify a read community string, the command sends the default read community string to the
cable modem.
Mode
root
interface:cable:csi(<c/s/i>)
Syntax
show [interface cable <c/s/i>] modem <mac-address>
{cm {bpi-base | bpi-plus {base | tek} | bpi-tek | device [event
{config | control | list} [read-community <string>] | downstream |
interface | mac | qosprofile | service | signal-quality | status |
system | upstream} | cm-filter | cpe-control | cpe-hosts |
service-flow {classifier [<cid> | phs] | log [<log-id>] |
parameter-set [<type>] | stats | upstream}}
Arguments
interface cable <c/s/i> Specifies the chassis, slot, interface of the cable modem for
which you want to display the status.
<mac-address> Specifies the MAC address of the cable modem.
Vista de pagina 470
1 2 ... 466 467 468 469 470 471 472 473 474 475 476 ... 651 652

Comentarios a estos manuales

Sin comentarios