ADC Cuda 12000 Información técnica Pagina 586

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 652
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 585
ADC Telecommunications, Inc.
582 CHAPTER 2: CUDA 12000 BASE SYSTEM COMMANDS
speed
Sets the speed on an Ethernet port.
Mode
interface:ethernet:csi(<c/s/i>)
Syntax
speed {auto | 10 | 100}
Arguments
Example
cli:192.168.208.3:interface:ethernet:csi(1/11/1)# speed 100
cli:192.168.208.3:interface:ethernet:csi(1/11/1)# show interface
Interface 1/11/1 Ethernet (100 Mb)
Configured duplex full
Configured speed 100 Mb
Auto-negotiation disable
In octets 0
In unicast 0
In multicast 0
In broadcast 0
Out octets 0
Out unicast 0
Out multicast 0
Out broadcast 0
{auto | 10 | 100} Specifies one of the following values:
auto – Speed is automatically negotiated. Note that, if you configure
the port to automatically negotiate speed, you also set the port to
automatically negotiate duplex mode.
10 – Sets the speed to 10 Mbps. Note that, if you configure the port
for 10 Mbps or 100 Mbps, you also set the duplex mode to it’s last
explicit setting (half or full).
100 – Sets the speed to 100 Mbps.
Vista de pagina 585
1 2 ... 581 582 583 584 585 586 587 588 589 590 591 ... 651 652

Comentarios a estos manuales

Sin comentarios