ADC Soneplex P-61-743 Especificaciones descargar pdf (Pagina 25)

- 24 -

7.1 Setting procedure

Follow the procedure below for setting.

(1)Supply of power

Apply 24VDC to the power supply for the power line and the signal line. After applying the power,

confirm that the power supply LED

○

a lights green (=Servo ON). Refer to 8.5 Servo ON (P.43)

if the power supply LED

○

a flashes green.

(2) Changes to Manual mode

Switch the controller mode switch

○

e to manual mode (M). In manual mode, the 7-segment LED

○

f indicates the value of the position switch

○

h with high speed flashing.

(3) Return to origin position

Confirm that the 7-segment LED

○

f display is changed to "F" by setting the position switch

○

to "15", then press the set button

○

g to start the return to origin. When the return to origin is

completed, the display of the 7-segment LED

○

f changes changes from flashing to solid.

Caution

● If you perform return to origin before the servo is turned on (Power supply LED

○

a lights up in

green) an alarm will be generated. Perform the return to origin after confirming that the servo is

turned on.

● Refer to 8.1 Returning to origin position(P.

39) for details.

● The direction of return to home depends on the actuator. Refer to 10. I

nitial setting value

per actuator (P.48).

(1)Supply of power

(

)

Chan

es to Manual mode

(4)Setting of position

(5)Setting of operation method

(6)Test run

(7)Setting speed / acceleration

(8)Setting completed

(3)Return to origin position

Repeat the

same

procedure

for all points

you would

like to set.

○

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 78 79

Comentarios a estos manuales

Sin comentarios

ADC Soneplex P-61-743 Especificaciones Pagina 25

Comentarios a estos manuales

Relacionado con productos y manuales para Redes ADC Soneplex P-61-743