Adc SG-1 Manual de usuario descargar pdf (Pagina 204)

Appendix B: Redirection Server June 30, 2006

B-10 SG1-UM-8500-03

Example:

ETHERNET COMMANDS

Using interface Ethernet command

• The Ethernet command is used for configuring the RDS IP address.

• It is located at the “configure terminal” menu.

• The change is affecting immediately.

Usage

interface Ethernet 1 <RDS IP address> <RDS mask> [mode <Ethernet mode>]

Parameter(s)

This is the IP address of the Ethernet interface of the Redirection Server.

This is the mask of the Ethernet interface of the Redirection Server.

This is the Ethernet mode and it is one of the following: Auto, 10H, 10F, 100H, 100F, 1000H(negotiate), 1000F

(negotiate). The default mode is Auto.

Example:

RDSHost>

RDSHost> show system

Up-time: 0 Hours, 38 Minutes, 23 Seconds

CPU usage: 50 %

Average Http hits per minute:8681

Accumulated Http hits on port 80:19993456

Accumulated Http hits on EDS port:39986912

RDSHost>

RDSHost> config termin <cr>

RDSHost(config)> interface Ethernet 1 192.168.2.5 255.255.255.0 <cr>

RDSHost(config)>

1 2 ... 199 200 201 202 203 204 205 206 207 208 209 ... 225 226

Sin comentarios

Adc SG-1 Manual de usuario Pagina 204