Adc SG-1 Manual de usuario Pagina 60

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 226
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 59
Chapter 6: First-Level Commands June 30, 2006
6-24 SG1-UM-8500-03
Displaying show mpls-labels commands
It displays the incoming labels binding received from the neighbors and the out-going label binding distributed by the
system. When no specific FEC is defined, the system shows all FECs.
Usage
Show mpls-labels <standard | vc> <out | in> [<FEC identifier>]
Parameter(s)
<standard | vc>
Standard labels are the first labels on the stack, while vc labels (tunnels) are the second lable on the stack.
<out | in>
Lables that are out-going or incoming.
<FEC identifier>
It is the FEC (Forward Equivalence Class) identifier.
Example(s)
Standard in:
Standard out:
Host> show mpls-labels
Note: The system default value is 0 (which means all FECs).
Host> show labels standard in
FEC ID IP destination FEC Label Next-Hop Interface
1 192.168.1.0/24 123876 10.0.1.8 Ethernet 1
2 212.8.1.0/24 1034 10.0.1.3 Ethernet 1
Host> show labels standard out
FEC ID IP destination FEC Label
1 192.168.1.0/24 123876
2 212.8.1.0/24 1034
Vista de pagina 59
1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 225 226

Comentarios a estos manuales

Sin comentarios