Adc SG-1 Manual de usuario descargar pdf (Pagina 33)

June 30, 2006 Chapter 4: Accessing the Command Line Interface

SG1-UM-8500-03 4-3

Parameter(s)

The SCC and rear I/O interfaces have specific designations as shown in Table 4-2.

Table 4-2. Interface Identification

The SCC IP address for interface in question. This address is set up to be on the same subnet as the Ethernet

network to which the SG-1 system is attached (format xxx.xxx.xxx.xxx).

The subnet mask associated with the SCC IP address. This address is based on the Ethernet network to which the

SG-1 system is attached (format xxx.xxx.xxx.xxx).

<mode>

Table 4-3. Ethernet Mode

Example(s)

Card/Type Slot/Port 1 Slot/Port 2

Rear I/O 1/1 1/2

Gigabit Ethernet 1/1 1/2

ATM/GiG-E Card

ATM 2/1 2/2

GiG-E 1/1 1/2

Value Explanation

10H 10M half-duplex

10F 10M full-duplex

100H 100M half-duplex

100F 100M full-duplex

1000H 1000M half-duplex

1000F 1000M full-duplex

Auto Auto select mode

Host> configure terminal

Host(config)# interface ethernet 0 \ 2 12.3.66.211 255.255.255.0 auto mtu 1500

Added Item

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 225 226

Sin comentarios

Adc SG-1 Manual de usuario Pagina 33